User Guide

Hardware Installation
2-28
Size Vendor Model Single/Double Chip Count
16M Hyundai HY57V168010CTC-10 x1 8
32M NEC D4516821AG5-A10-7JF x1 16
32M SEC KM48S2020CT-GH x2 18
32M Hyndai HY57V168010CTC-10 x2 16
32M Micron MT48LC2M8A1-08 x2 16
32M Fujitsu 81F16822D-A10-7JF x2 18
64M Mitsubishi M5M4V64S30ATP -10 x1 9
64M Fujitsu 81F64842B-103FN x1 9
64M NEC D4564841G5-A10-9JF x1 9
64M SEC KM48S8030BT-GH x1 9
64M Toshiba TC59S6408FTL-80H x1 9
Memory error checking is supported by parity check. To use parity check you
need 36 bit SIMM (32 bit data + 4 bit parity), which are automatically detected
by BIOS.
Tip: The parity mode uses 1 parity bit for each byte,
normally it is even parity mode, that is, each time the
memory data is updated, parity bit will be adjusted to
have even count "1" for each byte. When next time, if
memory is read with odd number of "1", the parity error
is occurred and this is called single bit error detection.