User Guide

Hardware Installation
2-22
2.3.14 Wake-up Connector
This mainboard implements special circuit to support
Modem Ring-On, both Internal Modem Card (AOpen
MP56) and external box Modem are supported. Since
Internal Modem card consumes no power when system
power is off, it is recommended to use Internal Modem.
To use AOpen MP56, connect 4-pin cable from
RING
connector of MP56 to
WKUP connector on the
mainboard.
Pin
1
2
3
4
Description
+5V SB
NC
RING
GND
Tip: Not only for Modem Ring-On, there are many
other possible applications. For example, IR
wakeup or voice wakeup.
1
2
3
4
Modem-WKUP
2.3.15 LAN Wake-up Connector
This mainboard implements a LAN-WKUP connector.
To use LAN Wake-up function, you need a network
card that supports this feature. In addition, you also
need to install a network management software, such
as ADM.
Pin
1
2
3
Description
+5V SB
GND
LID
1
2
3
LAN-WKUP