User Guide

AMI BIOS Utility
3-4
disk or IDE device. Select CD-ROM or Auto if you have a CD-ROM
installed in your system. If you have an old type HDD installed, you may need
to enter the HDD parameters manually. To do this, you must set this
parameter to User. Set this to Not Installed to bypass the function.
LBA/Large Mode
This enhanced IDE feature allows the system to use a hard disk with a capacity
of more than 528 MB. This is made possible through the Logical Block
Address (LBA) mode translation. Set the parameter to Off to disregard the
feature.
This parameter becomes non-configurable when the HDD Type parameter is
set to Auto.