User Guide

AMI BIOS Utility
3-23
• AskIR - Select this setting only if the IR function is activated (i.e., an
IR module is installed in your system). This setting allows infrared serial
communication at a maximum baud rate of 19.2K baud.
Onboard Parallel Port
This parameter allows you to select the address for the parallel port. Selecting
Disabled deactivates the parallel port.
PARALLEL PORT IRQ
This parameter is configurable only if the Onboard Parallel Port is NOT set to
Auto. This allows you to set an IRQ for the parallel port function. The
available IRQ selections are 5 and 7.
PARALLEL PORT MODE
This parameter specifies the parallel port mode. The mode options are SPP,
EPP and ECP.
Onboard IDE
This parameter enables or disables the onboard IDE controller.
3.3 Security Setup
The Security window contains the password and anti-virus features.