User Guide

AMI BIOS Utility
3-21
INTD, Hardwired, and Disabled. If the PCI IDE Card parameter
is set to Auto, this parameter becomes non-configurable.
PCI IDE Secondary IRQ
This parameter lets you assign an IRQ for the IDE device connected to your
secondary IDE card connector. The settings are INTA, INTB, INTC,
INTD, Hardwired, and Disabled. If the PCI IDE Card parameter
is set to Auto, this parameter becomes non-configurable.
PCI Slot 1, 2, 3, and 4 IRQ Priority
These parameters let you specify the appropriate interrupt for each occupied
PCI slots.
DMA Channel 0, 1, 3, 5, 6, and 7
These lines allow you to assign the available DMA channels to either PnP
device or Legacy/ISA functions.
IRQ 3, 4, 5, 7, 9, 10, 11, 14, and 15
These lines allow you to assign the available IRQs to either PCI/PnP or
Legacy/ISA devices.
Reserved Memory Size for ISA
This option lets you specify the memory area reserved for Legacy/ISA devices
to avoid conflict.
Reserved Memory Base for ISA
This option lets you specify the memory base of the specified memory area
reserved for Legacy/ISA devices to avoid conflict.
3.2.6 Peripheral Setup
Select Peripheral from the Setup menu and the following screen appears.