User Guide

AMI BIOS Utility
3-20
Plug-and-Play Aware O/S
Enable this parameter only if you have a Plug-and-Play operating system such
as Windows 95. This is to ensure that the PnP cards are initialized during
POST and proper resources are allocated to each card by the Plug-and-Play
operating system.
PCI VGA Palette Snoop
PCI devices support the palette snooping technique that enables the device to
control access to their palette registers. Enable this parameter activates the
palette snooping function in the PCI VGA devices. Check your VGA card
manual for more information about this function. The default setting is
Disabled.
PCI IDE Card
This function allows you to select the PCI slots that you want to enable, if
there are any offboard PCI IDE card present. Set this parameter to Auto to
automatically configure the installed PCI card.
PCI IDE Primary IRQ
This parameter lets you assign an IRQ for the IDE device connected to your
primary IDE card connector. The settings are INTA, INTB, INTC,