User Guide

AMI BIOS Utility
3-10
Primary Display
This function detects the type of VGA in use. The selections are VGA/EGA,
CGA 40 x 25, CGA 80 x 25, Mono, and Absent. The
default setting is VGA/EGA.
Password Check
This parameter lets you set when to check for the password. When set to
Always, a password prompt appears every time you turn on the computer or
when you enter Setup. When set to Setup, the password prompt appears
when you try to enter setup. The Optimal and Turbo default setting is
Setup.
Parity Check
Set this parameter to Enabled if you install SIMMs with parity in your
system. Otherwise, set this parameter to Disabled. Since the DRAM can
still operate without enabling the parity scheme for SIMMs with parity, this
function is normally set to Disabled.
OS/2 Compatible Mode
Enable the parameter if your system is utilizing an OS/2 operating system and
has a memory size of more than 64 MB. Otherwise, set this to Disabled.
The default setting is Disabled.
Internal Cache
This function lets you enable or disable the internal cache.
External Cache
This function lets you enable or disable the external cache.