User Guide

Hardware Installation
2-18
2.10.2 USB Devices
You need a USB bracket to enable your
system to support USB device(s). To
attach a USB bracket, simply insert the
bracket connector to the onboard USB
connector marked CN14. See section
1.1 for the location of the USB
connector.
2.10.3 Serial Devices (COM1/COM2)
To support serial devices, insert the
serial port 1 connector cable to the
onboard COM 1 connector marked
CN1. Secure the port into its
appropriate location in the housing frame
with the necessary screws.
Then plug in the serial device connector
to serial port 1 or to COM2 port marked
CN11 on the system board.
COM1
COM