User Guide

Hardware Installation
2-17
2.10 Connecting Peripherals
2.10.1 Power Cable
The board comes with two different
power connectors marked as CN2 and
CN3. The CN2 power connector
accepts the PS/2 power supply cables,
i.e., two cables with six wires each.
When plugging in these cables to the
onboard power connector, make sure
that all the black wires are in the center.
The CN3 power connector accepts an
ATX power supply cable. .
CN2 Power Cable Connection (PS/2)
CN3 Power Cable Connection (ATX)
Make sure that the power supply is off before
connecting or disconnecting the power cable.