Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
85Operating Manual 1176.7649.02 ─ 04
Remote command:
CONFigure:BURSt:STATistics:BSTReam[:IMMediate] on page 152
Signal Field (IEEE 802.11a, ac, g (OFDM), j , n, p) ← Statistics
Sets the "Signal Field" result display.
This result display shows the decoded data from the signal field of the PPDU. There-
fore it is only available if, in the "Demod Settings" dialog box, the "Signal Field Content"
option is activated.
For the IEEE 802.11ac, n standards an enhanced Signal Field measurement is availa-
ble, see chapter 3.7, "Signal Field Measurement (IEEE 802.11ac, n (SISO+MIMO))",
on page 39.
Softkeys of the WLAN TX Menu