Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
81Operating Manual 1176.7649.02 ─ 04
Remote command:
CONFigure:BURSt:SPECtrum:ACPR[:IMMediate] on page 150
CALCulate<n>:MARKer<1>:FUNCtion:POWer:RESult[:CURRent]?
on page 144
CALCulate<n>:MARKer<1>:FUNCtion:POWer:RESult:MAXHold? on page 144
Gating Settings On/Off ← Spectrum
See "Gating Settings On/Off ((IEEE 802.11a, b, g, j, p)" on page 67.
SEM Settings ← Spectrum
Displays the "SEM Settings" dialog box that contains the following editable settings:
SEM according to ← SEM Settings ← Spectrum
Specifies how the Spectrum Emission Mask settings and limits are applied. The follow-
ing standards are supported:
"ETSI"
Settings and limits are as specified in the standard
"IEEE"
Settings and limits are as specified in the IEEE Std 802.11n™-2009
Figure 20-17—Transmit spectral mask for 20 MHz transmission. For
other IEEE standards see table 5-1 in the remote command descrip-
tion.
"User"
Settings and limits are configured via an XML file
Remote command:
[SENSe:]POWer:SEM on page 198
File Name ← SEM Settings ← Spectrum
When "SEM according to":"User" settings are specified, "File Name" shows the name
of the loaded XML file. Clicking the arrow switches to the File Manager to locate an
XML file, and automatically selects "SEM according to":"User".
Softkeys of the WLAN TX Menu