Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
62Operating Manual 1176.7649.02 ─ 04
4 Instrument Functions WLAN TX Measure-
ments
To open the WLAN menu
●
If the "WLAN" mode is not the active measurement mode, press the MODE key
and select the "WLAN" softkey
To exit the "WLAN" measurement mode, select another option.
Menu and softkey description
●
chapter 4.1, "Softkeys of the WLAN TX Menu", on page 63
●
chapter 4.4, "Softkeys of the Sweep Menu – SWEEP key ", on page 110
●
chapter 4.6, "Softkeys of the Marker Menu – MKR key (WLAN)", on page 111
●
chapter 4.7, "Softkeys of the Marker To Menu – MKR-> key", on page 112
●
chapter 4.8, "Softkeys of the Lines Menu – LINES key", on page 113
●
chapter 4.5, "Softkeys of the Trace Menu – TRAC key", on page 111
●
chapter 4.9, "Softkeys of the Input/Output Menu for WLAN Measurements",
on page 113
The "Span", "Bandwidth", "Marker Function", and "Auto Set" menus are not available in
the WLAN mode.
The FREQ, AMPT, and TRIG keys open the "General Settings" or the "Demod Set-
tings" dialog box. For details refer to the "Settings General/Demod" on page 64 soft-
key description ("WLAN" menu).
To display help to a softkey, press the HELP key and then the softkey for which you
want to display help. To close the help window, press the ESC key. For further infor-
mation refer to chapter 1.3, "How to Use the Help System", on page 8.
Further information
This chapter provides further information about the measurements and result displays
for the WLAN application.
4.1 Softkeys of the WLAN TX Menu.................................................................................63
4.2 General Settings Dialog Box (K91)............................................................................87
4.2.1 General Settings........................................................................................................... 88
4.2.2 Advanced Settings........................................................................................................ 92
4.2.3 STC/MIMO Settings (IEEE 802.11ac, n (MIMO) only).................................................. 93
4.3 Demod Settings Dialog Box....................................................................................... 97
4.3.1 Demod Settings.............................................................................................................97
4.3.2 Advanced Demod Settings (IEEE 802.11ac, n (MIMO) only)..................................... 104
4.3.3 MIMO Settings (IEEE 802.11ac, n (MIMO) only)........................................................ 109