Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
181Operating Manual 1176.7649.02 ─ 04
5.14 SENSe Subsystem (WLAN)
The SENSe command is used to set and get the values of parameters in the remote
instrument. The get variant of the SENSe command differs from set in that it takes no
parameter values (unless otherwise stated) but is followed by the character '?' and will
return the parameter's value in the same format as it is set.
5.14.1 Analysis modulation format.........................................................................................181
5.14.2 Commands of the SENSe Subsystem........................................................................ 182
5.14.1 Analysis modulation format
The following modulation formats are available for analysis using R&S FSV-K91 (see
also [SENSe:]DEMod:FORMat:BANalyze on page 187):
Parameter Standard Description
'BPSK' Alias for BI-Phase shift keying at higher data rate for selected standard
'BPSK3' IEEE 802.11j (10 MHz) BI-Phase shift keying at 3 Mbps
'BPSK6' IEEE 802.11a, g (OFDM), j (20 MHz) &
Turbo
BI-Phase shift keying at 6 Mbps
'BPSK9' IEEE 802.11a, g (OFDM), j (20 MHz) &
Turbo
BI-Phase shift keying at 9 Mbps
'BPSK45' IEEE 802.11j (10 MHz) BI-Phase shift keying at 4.5 Mbps
'BPSK65' IEEE 802.11n BI-Phase shift keying at 6.5 Mbps
'BPSK72' IEEE 802.11n BI-Phase shift keying at 7.2 Mbps
'CCK11' IEEE 802.11b & g (Single Carrier) Complementary Code Keying at 11 Mbps
'CCK55' IEEE 802.11b & g (Single Carrier) Complementary Code Keying at 5.5 Mbps
'DBPSK1' IEEE 802.11b & g (Single Carrier) Differential BI-Phase shift keying
'DQPSK2' IEEE 802.11b & g (Single Carrier) Differential Quadrature phase shift keying
'PBCC11' IEEE 802.11b & g (Single Carrier) PBCC at 11 Mbps
'PBCC22' IEEE 802.11g (Single Carrier) PBCC at 11 Mbps
'PBCC55' IEEE 802.11b & g (Single Carrier) PBCC at 5.5 Mbps
'QAM16' Alias for Quadrature Amplitude Modulation at higher data rate for selected standard
'QAM64' Alias for Quadrature Amplitude Modulation at higher data rate for selected standard
'QAM1612' IEEE 802.11j (10 MHz) Quadrature Amplitude Modulation at 12 Mbps
'QAM1618' IEEE 802.11j (10 MHz) Quadrature Amplitude Modulation at 18 Mbps
'QAM1624' IEEE 802.11a, g (OFDM), j (20 MHz) &
Turbo
Quadrature Amplitude Modulation at 24 Mbps
'QAM1626' IEEE 802.11n Quadrature Amplitude Modulation at 26 Mbps
SENSe Subsystem (WLAN)