Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
173Operating Manual 1176.7649.02 ─ 04
FETCh:BURSt:FERRor:AVERage?
FETCh:BURSt:FERRor:MAXimum?
FETCh:BURSt:FERRor:MINimum?
This command returns the measured average, minimum or maximum frequency errors
in Hertz.
Example:
FETC:BURS:FERR:MAX?
The maximum frequency error from the most recent measure-
ment is returned.
Usage: Query only
Mode: WLAN
FETCh:BURSt:GIMBalance:AVERage?
FETCh:BURSt:GIMBalance:MAXimum?
FETCh:BURSt:GIMBalance:MINimum?
This command returns the measured average, minimum or maximum IQ Imbalance
errors in dB.
Example:
FETC:BURS:GIMB:MAX?
The maximum IQ Imbalance error from the most recent mea-
surement is returned.
Usage: Query only
Mode: WLAN
FETCh:BURSt:IQOFfset:AVERage?
FETCh:BURSt:IQOFfset:MAXimum?
FETCh:BURSt:IQOFfset:MINimum?
This command returns the measured average, minimum or maximum IQ Offset errors
in dB.
Example:
FETC:BURS:IQOF:MAX?
The maximum IQ Offset error from the most recent measure-
ment is returned.
Usage: Query only
Mode: WLAN
FETCh:BURSt:PAYLoad?
This command returns the measured power in the payload of the burst.
Example:
FETC:BURS:PAYL?
The burst payload power is returned
Usage: Query only
Mode: WLAN
FETCh Subsystem (WLAN)