Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
140Operating Manual 1176.7649.02 ─ 04
<m> depends on mode
irrelevant
Example:
CALC:MARK:AOFF
Switches off all markers.
Usage: Event
Manual operation: See "Marker Off" on page 112
CALCulate<n>:MARKer<1>:BSYMbol <BurstNumber>, <SymbolNumber>
This command positions the selected marker to the indicated symbol in the indicated
burst.
This command only applies to 802.11b standard for the following result displays:
●
Constellation vs Symbol
●
EVM vs Symbol
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<BurstNumber>,
<SymbolNumber>
The first numeric value is the burst number and the second
numeric value is the symbol number.
Example:
CALC:MARK1:BSYM 2,10
Positions marker 1 to symbol 10 of burst 2.
CALC:MARK1:BSYM?
Outputs the burst and symbol values of marker 1.
Mode: WLAN
CALCulate<n>:MARKer<1>:CARRier <Carrier>
This command positions the selected marker to the indicated carrier.
This command is query only for the following result displays:
●
Constellation vs Symbol
●
Constellation vs Carrier
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Carrier>
Example:
CALC:MARK:CARR -7
Positions marker 1 to carrier -7.
CALC:MARK:CARR?
Outputs the carrier value of marker 1.
CALCulate:MARKer Subsystem (WLAN)