Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
138Operating Manual 1176.7649.02 ─ 04
Suffix:
<n>
.
1...4
irrelevant
Example:
CALC:LIM:SPEC:MASK:CHEC:X?
Returns the frequency at the maximum overstepping.
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:SPECtrum:MASK:CHECk:Y?
This command returns the Y-value at the maximum overstepping of the spectrum mask
limits.
Suffix:
<n>
.
1...4
irrelevant
Example:
CALC:LIM:SPEC:MASK:CHEC:Y?
Returns the power at the maximum overstepping.
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:UPPer[:DATA] <Value>
This command defines the values for the upper limit lines independently of the mea-
surement window. The number of values for the CONTrol axis and for the correspond-
ing UPPer limit line has to be identical. Otherwise default values are entered for miss-
ing values or unnecessary values are deleted.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value>
Example:
CALC:LIM2:UPP -10,0,0,-10,-5
Defines 5 upper limit values for limit line 2 in the preset unit.
CALC:LIM2:UPP?
Outputs the upper limit values for limit line 2 separated by a
comma.
Mode: WLAN
5.5 CALCulate:MARKer Subsystem (WLAN)
The CALCulate:MARKer subsystem checks the marker functions of the instrument.
CALCulate:MARKer Subsystem (WLAN)