Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
136Operating Manual 1176.7649.02 ─ 04
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:TRISe:MAXimum <Value>
This command sets the maximum rise time limit.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in seconds
Example:
CALC:LIM:BURS:TRIS:MAX 0.000001
Maximum rise time limit is set to 1 µs
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:TRISe:MAXimum:RESult?
This command returns the maximum rise time limit result.
Suffix:
<n>
.
1...4
irrelevant
Example:
CALC:LIM:BURS:TRIS:MAX:RES?
Maximum rise time limit result is returned
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:CONTrol[:DATA] <Value>
This command defines the X-axis values (frequencies) of the upper or lower limit lines.
The number of values for the CONTrol axis and for the corresponding UPPer limit line
has to be identical. Otherwise default values are entered for missing values or unnec-
essary values are deleted.
Parameters:
<Value>
Example:
CALC:LIM2:CONT 1MHz,30MHz,100MHz, 300MHz,1GHz
Defines 5 reference values for the X-axis of limit line 2
CALC:LIM2:CONT?
Outputs the reference values for the X-axis of limit line 2 separa-
ted by a comma.
Mode: WLAN
CALCulate:LIMit Subsystem (WLAN)