Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
133Operating Manual 1176.7649.02 ─ 04
CALCulate<n>:LIMit<1>:BURSt:IQOFfset:MAXimum:RESult?
This command returns the maximum IQ Offset error limit result.
Suffix:
<n>
.
1...4
irrelevant
Example:
CALC:LIM:BURS:IQOF:MAX:RES?
Maximum IQ Offset error limit result is returned
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:SYMBolerror[:AVERage] <Value>
This command sets the average symbol error limit.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in Hertz
Example:
CALC:LIM:BURS:SYMB 10000
The average symbol error limit is set to 10kHz
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:SYMBolerror[:AVERage]:RESult?
This command returns the average symbol error limit result.
Suffix:
<n>
.
1...4
irrelevant
Example:
CALC:LIM:BURS:SYMB:RES?
Average symbol error limit result is returned
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:SYMBolerror:MAXimum <Value>
This command sets the maximum symbol error limit.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in Hertz
CALCulate:LIMit Subsystem (WLAN)