Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
131Operating Manual 1176.7649.02 ─ 04
CALCulate<n>:LIMit<1>:BURSt:FERRor[:AVERage] <Value>
This command sets the average frequency error limit.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in Hertz
Example:
CALC:LIM:BURS:FERR 10000
The average frequency error limit is set to 10 kHz
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:FERRor[:AVERage]:RESult?
This command returns the average frequency error limit result.
Suffix:
<n>
.
1...4
irrelevant
Example:
CALC:LIM:BURS:FERR:RES?
Average frequency error limit result is returned
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:FERRor:MAXimum <Value>
This command sets the maximum frequency error limit.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in Hertz
Example:
CALC:LIM:BURS:FERR:MAX?
Maximum frequency error limit is returned
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:FERRor:MAXimum:RESult?
This command returns the maximum frequency error limit result.
Suffix:
<n>
.
1...4
irrelevant
CALCulate:LIMit Subsystem (WLAN)