Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
126Operating Manual 1176.7649.02 ─ 04
CALCulate<n>:LIMit<1>:BURSt:EVM:ALL[:AVERage]:RESult?
This command returns the average error vector magnitude limit result. This is a com-
bined figure that represents the pilot, data and the free carrier.
Suffix:
<n>
.
1...4
irrelevant
Return values:
<Results> 0 | 1
0
PASSED
1
FAILED
Example:
CALC:LIM:BURS:EVM:ALL:RES?
Average EVM for all carrier limit result is returned
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:EVM:ALL:MAXimum <Value>
This command sets the maximum error vector magnitude limit. This is a combined fig-
ure that represents the pilot, data and the free carrier.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in dB
Example:
CALC:LIM:BURS:EVM:ALL:MAX?
Maximum EVM for all carrier limit is returned
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:EVM:ALL:MAXimum:RESult?
This command returns the maximum error vector magnitude limit result. This is a com-
bined figure that represents the pilot, data and the free carrier.
Suffix:
<n>
.
1...4
irrelevant
CALCulate:LIMit Subsystem (WLAN)