Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
125Operating Manual 1176.7649.02 ─ 04
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in dB
Example:
CALC:LIM:BURS:EVM -25.0
Average EVM limit is set to -25 dB
Mode: WLAN
CALCulate<n>:
LIMit<1>:BURSt:EVM[:AVERage]:RESult?
This command returns the average error vector magnitude limit result for the IEEE
802.11b standard.
Suffix:
<n>
.
1...4
irrelevant
Return values:
<Results> 0 | 1
0
PASSED
1
FAILED
Example:
CALC:LIM:BURS:EVM:RES?
Average EVM limit result is returned
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<1>:BURSt:EVM:ALL[:AVERage] <Value>
This command sets the average error vector magnitude limit. This is a combined figure
that represents the pilot, data and the free carrier.
Suffix:
<n>
.
1...4
irrelevant
Parameters:
<Value> numeric value in dB
Example:
CALC:LIM:BURS:EVM:ALL -25.0
Average EVM for all carrier limit is set to -25.0 dB
Mode: WLAN
CALCulate:LIMit Subsystem (WLAN)