Service manual

Remote Commands for WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
122Operating Manual 1176.7649.02 ─ 04
CALCulate<n>:LIMit<1>:SPECtrum:MASK:CHECk:X?.......................................................137
CALCulate<n>:LIMit<1>:SPECtrum:MASK:CHECk:Y?.......................................................138
CALCulate<n>:LIMit<1>:UPPer[:DATA]............................................................................138
CALCulate<n>:LIMit<1>:ACPower:ACHannel?
This command returns the ACP adjacent channel limit for IEEE 802.11j if defined.
Suffix:
<n>
.
1...4
irrelevant
Return values:
<Result> numeric value in dB
Example:
CALC:LIM:ACP:ACH?
Returns the IEEE 802.11j ACP adjacent channel limit.
Usage: Query only
Mode: WLAN
CALCulate<n>:LIMit<k>:ACPower:ACHannel:RESult
This command queries the result of the limit check for the upper/lower adjacent chan-
nel when adjacent channel power measurement is performed.
If the power measurement of the adjacent channel is switched off, the command pro-
duces a query error.
Suffix:
<n>
.
Selects the measurement window.
<k> irrelevant
Return values:
Result The result is returned in the form <result>, <result> where
<result> = PASSED | FAILED, and where the first returned value
denotes the lower, the second denotes the upper adjacent chan-
nel.
CALCulate:LIMit Subsystem (WLAN)