Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
114Operating Manual 1176.7649.02 ─ 04
└ Firmware Update.......................................................................................... 114
└ R&S Support.................................................................................................114
└ DigIConf........................................................................................................115
EXIQ
Opens a configuration dialog box for an optionally connected R&S EX-IQ-BOX and a
submenu to access the main settings quickly.
Note: The EX-IQ-Box functionality is not supported for R&S FSV models
1321.3008Kxx.
If the optional R&S DigIConf software is installed, the submenu consists only of one
key to access the software. Note that R&S DigIConf requires a USB connection
(not LAN!) from the R&S FSV to the R&S EX-IQ-BOX in addition to the R&S Digi-
tal I/Q Interface connection. R&S DigIConf version 2.10 or higher is required.
For typical applications of the R&S EX-IQ-BOX see also the description of the R&S
Digital I/Q Interface (R&S FSV-B17) in the base unit manual.
For details on configuration see the "R&S®Ex I/Q Box - External Signal Interface Mod-
ule Manual".
For details on installation and operation of the R&S DigIConf software, see the
"R&S®EX-IQ-BOX Digital Interface Module R&S®DigIConf Software Operating Man-
ual".
TX Settings ← EXIQ
Opens the "EX-IQ-BOX Settings" dialog box to configure the R&S FSV for digital out-
put to a connected device ("Transmitter" Type).
RX Settings ← EXIQ
Opens the "EX-IQ-BOX Settings" dialog box to configure the R&S FSV for digital input
from a connected device ("Receiver" Type).
Send To ← EXIQ
The configuration settings defined in the dialog box are transferred to the R&S EX-IQ-
BOX.
Firmware Update ← EXIQ
If a firmware update for the R&S EX-IQ-BOX is delivered with the R&S FSV firmware,
this function is available. In this case, when you select the softkey, the firmware update
is performed.
R&S Support ← EXIQ
Stores useful information for troubleshooting in case of errors.
This data is stored in the C:\R_S\Instr\user\Support directory on the instru-
ment.
If you contact the Rohde&Schwarz support to get help for a certain problem, send
these files to the support in order to identify and solve the problem faster.
Softkeys of the Input/Output Menu for WLAN Measurements