Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
113Operating Manual 1176.7649.02 ─ 04
MKR -> Trace
Opens an edit dialog box to enter the number of the trace, on which the marker is to be
placed. This softkey is available for all result displays with more than one trace.
Remote command:
CALCulate<n>:MARKer<1>:TRACe on page 142
4.8 Softkeys of the Lines Menu – LINES key
The following table shows all softkeys available in the ""Lines"" menu in ""WLAN""
mode (LINES key). It is possible that your instrument configuration does not provide all
softkeys. If a softkey is only available with a special option, model or (measurement)
mode, this information is delivered in the corresponding softkey description.
This menu is only available if the results are displayed in form of a list (for details see
chapter 3.9.2, "Result Summary List", on page 54 and the "Display Graph/List" softkey,
"Display List/Graph" on page 64).
Default Current............................................................................................................113
Default All....................................................................................................................113
Default Current
Resets all limits for the current modulation scheme to the values specified in the
selected standard.
Remote command:
chapter 5.4, "CALCulate:LIMit Subsystem (WLAN)", on page 121
Default All
Resets all limits for all modulation schemes to the values specified in the selected
standard.
Remote command:
chapter 5.4, "CALCulate:LIMit Subsystem (WLAN)", on page 121
4.9 Softkeys of the Input/Output Menu for WLAN Meas-
urements
The following chapter describes all softkeys available in the "Input/Output" menu for
WLAN measurements.
Note that the digital baseband functions are only available if the optional Digital Base-
band Interface (R&S FSV-B17) is installed.
For details see the base unit description.
EXIQ............................................................................................................................114
└ TX Settings................................................................................................... 114
└ RX Settings...................................................................................................114
└ Send To........................................................................................................ 114
Softkeys of the Lines Menu – LINES key