Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
111Operating Manual 1176.7649.02 ─ 04
4.5 Softkeys of the Trace Menu – TRAC key
The following table shows all softkeys available in the "Trace" menu in "WLAN" mode
(TRACE key). It is possible that your instrument configuration does not provide all soft-
keys. If a softkey is only available with a special option, model or (measurement)
mode, this information is delivered in the corresponding softkey description.
Display List/Graph
Configures the result display. The measurement results are displayed either in form of
a list of measurement points or as a graphical trace.
For MIMO measurements (IEEE 802.11ac or n (MIMO) only) the results are provided
as an overview of all data streams in the Global Result Summary (List 1), and for the
individual streams in separate result summaries (List 2).
Remote command:
DISPlay[:WINDow<n>]:TABLe on page 165
For result queries see chapter 5.8, "FETCh Subsystem (WLAN)", on page 168
Screen Focus A/B
Selects the active screen for IQ measurement results in split and full screen mode.
Only the markers of an active screen can be controlled.
Remote command:
DISPlay[:WINDow<n>]:SSELect on page 164
Screen Size Full/Split
Changes the display between split and full screen for IQ measurement results. Fre-
quency sweep measurement results are always displayed in full screen.
Remote command:
DISPlay[:WINDow<n>][:SUBWindow<m>]:SIZE on page 164
4.6 Softkeys of the Marker Menu – MKR key (WLAN)
The following table shows all softkeys available in the "Marker" menu in "WLAN" mode
(MKR key). It is possible that your instrument configuration does not provide all soft-
keys. If a softkey is only available with a special option, model or (measurement)
mode, this information is delivered in the corresponding softkey description. Close all
settings dialog boxes before opening the "Marker" menu.
Softkeys of the Trace Menu – TRAC key