Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
107Operating Manual 1176.7649.02 ─ 04
"Meas only if
STBC field = 1
(+1
Stream)""(M1)"
(IEEE
802.11N)
Only PPDUs with the specified STBC field content are analyzed.
"Meas only if
STBC field = 2
(+2
Stream)""(M2)"
(IEEE
802.11N)
Only PPDUs with the specified STBC field content are analyzed.
"Demod all as
STBC field =
1""(D1)"(IEEE
802.11N)
All PPDUs are analyzed assuming the specified STBC field content.
"Demod all as
STBC field =
2""(D2)"(IEEE
802.11N)
All PPDUs are analyzed assuming the specified STBC field content.
"Meas only if
STBC = 1
(Nsts =
2Nss)""(M1)"(I
EEE
802.11AC)
Only PPDUs with the specified STBC field content are analyzed.
"Demod all as
STBC = 1
(Nsts =
2Nss)""(D1)"(I
EEE
802.11AC)
All PPDUs are analyzed assuming the specified STBC field content.
Remote command:
CONFigure:WLAN:STBC:AUTO:TYPE on page 163
Guard Interval Length
Defines the guard interval length of the PPDUs taking part in the analysis.
"Auto, same
type as first
PPDU:"
All PPDUs using the guard interval length identical to the first recog-
nized PPDU are analyzed.
"Auto, individu-
ally for each
PPDU: "
All PPDUs are analyzed.
"Meas only
Short"
Only PPDUs with short guard interval length are analyzed.
"Meas only
Long"
Only PPDUs with long guard interval length are analyzed.
Demod Settings Dialog Box