Service manual

Instrument Functions WLAN TX Measurements
R&S
®
FSV-K91/91n/91ac/91p
105Operating Manual 1176.7649.02 ─ 04
"Auto, individu-
ally for each
PPDU"
All PPDUs are analyzed
"Meas only
Mixed Mode"
Only mixed mode PPDUs are analyzed
"Meas only
Greenfield"
Only Greenfield mode PPDUs are analyzed.
"Demod all as
Mixed Mode"
All PPDUs are analyzed as Mixed Mode PPDUs
"Demod all as
Greenfield"
All PPDUs are analyzed as Greenfield PPDUs.
Remote command:
[SENSe:]DEMod:FORMat:BANalyze:BTYPe:AUTO:TYPE on page 188
Channel Bandwidth to measure
Defines the channel bandwidth of the PPDUs taking part in the analysis.
"Auto, same
type as first
PPDU"
The channel bandwidth of the first valid PPDUs is detected and sub-
sequent PPDUs are analyzed only if they have the same channel
bandwidth.
"Auto, individu-
ally for each
PPDU"
All PPDUs are analyzed regardless of their channel bandwidth
"Meas only
x MHz signal:"
Only PPDUs with a channel bandwidth of x MHzare analyzed
"Demod all as
x MHz signal:"
All PPDUs are analyzed as x MHz channel bandwidth PPDUs.
Remote command:
[SENSe:]BANDwidth:CHANnel:AUTO:TYPE on page 183
MCS Index to use
Defines the Modulation and Coding Scheme (MCS) index of the PPDUs taking part in
the analysis.
"Auto, same
type as first
PPDU:"
All PPDUs using the MCS index identical to the first recognized
PPDU are analyzed.
" Auto, individ-
ually for each
PPDU"
All PPDUs are analyzed
"Meas only the
specified MCS"
Only PPDUs with the MCS index specified in the MCS index field are
analyzed
"Demod all
with specified
MCS"
The MCS index of the MCS index field is applied to all PPDUs.
Remote command:
[SENSe:]DEMod:FORMat:MCSIndex:MODE on page 194
Demod Settings Dialog Box