Service manual

Introduction
R&S
®
FSV-K91/91n/91ac/91p
10Operating Manual 1176.7649.02 ─ 04
2 Introduction
This document contains all information required for operation of an R&S FSV equipped
with Application Firmware R&S FSV. It covers operation via menus and the remote
control commands for WLAN measurements.
This option is not available for R&S FSV 40 model 1307.9002K39.
This part of the documentation consists of the following chapters:
●
chapter 3.2, "Basic Measurement Examples", on page 13
Describes the measurement setup for WLAN TX measurements.
●
chapter 4, "Instrument Functions WLAN TX Measurements", on page 62
Describes the overall instrument functions and provides further information
●
chapter 4.1, "Softkeys of the WLAN TX Menu", on page 63
Shows all softkeys available in the "WLAN" menu. This chapter also refers to the
remote control commands associated with each softkey function.
●
chapter 5, "Remote Commands for WLAN TX Measurements", on page 116
Describes all remote control commands defined for the power meter measurement.
This part of the documentation includes only functions of the Application Firmware
R&S FSV-K91/91n/91ac/91p. For all other descriptions, please refer to the description
of the base unit.