User`s manual

10 Installing and Using the Axel-VNCviewer
3.2.1 - VNC Terminals with Login
This method offers a standard Linux/Unix "login box" on the VNC terminal. This
logon (username + password) allows the AX3000 user to be identified and given
their respective desktop
The procedure to set up a login session can vary on the display manager used.
(See below).
a) Display Manager KDE 2.2
For KDE 2.2, VNC terminals can be declared either through /etc/inittab or the
environment (x)inetd.
There are two main differences:
- inittab gives each terminal its own unique TCP port (5901, 5902, etc.).
- (x)inetd requires only one TCP port for each type of terminal (example:
5950 for all 800x600 and 256-colour terminals).
Note
: a more precise list of differences is given in Chapter 6.6.
This chapter deals only with the (x)inetd method. For more information about the
inittab method, consult the Section 'Other Display Managers'.
After selecting the (x)inetd method, a similar screen is displayed:
(x)inetd and /usr/share/config/kdm/kdmrc will be modified.
Please confirm: Y
*** Checking INET environment (/etc/services and /etc/xinetd.d/vnc)
800x600 - 8 bpp (port 5950): OK
800x600 - 16 bpp (port 5951): OK
1024x768 - 8 bpp (port 5952): OK
1024x768 - 16 bpp (port 5953): OK
*** Checking XDMCP (/usr/share/config/kdm/kdmrc)
xdmcp has been already enabled !
The four 5950, 5951, 5952 and 5953 TCP ports have been set to handle VNC
connections.