User`s manual

Appendix
AXEL Office Server 87
ch%_backup_prioritary= (yes | no)
ch%_line_type=direct (direct | telecom | dedicated)
ch%_speed=38400 (300 | 600 | 1200 | 2400 | 4800
9600 | 19200 | 38400 | 57600
115200)
ch%_data (7-1-none | 7-1-odd | 7-1-even
8-1-none | 8-1-odd | 8-1-even
7-2-none | 7-2-odd | 7-2-even
8-2-none | 8-2-odd | 8-2-even)
ch%_fifo=dtr (numeric from 1 to 16)
ch%_input_hdsk=dtr (none | xon | xpc | rts | dtr)
ch%_iflow_passthru= (yes | no)
ch%_output_hdsk=dtr (none | xon | xpc | cts | dsr)
ch%_detect=dtr (cts | dsr | soft)
ch%_hangup=dtr (dtr | rts | soft)
ch%_do_hangup= (yes | no)
ch%_do_netclose= (yes | no)
ch%_hayes_escape= (character string, 10 char max.)
ch%_hayes_hangup= (character string, 10 char max.)
ch%_hayes_reset= (character string, 20 char max.)
ch%_hayes_init= (character string, 40 char max.)
ch%_phone_number= (character string, 20 char max.)
ch%_modem_inactivity= (numeric from 0 to 99)
Notes:
- If
ch%_line_type is equal to direct, the last 9 parameters are
commented out (except
ch%_do_netclose if the device presence is
enabled).
- If
ch%_hangup is not equal to soft, then ch%_hayes_escape and
ch%_hayes_hangup are commented out.
- Depending on the associated service, some parameters can be inactive.
They are unmarked in the following table and commented out in the
configuration file: