User Guide

73
A
A
X
X
4
4
B
B
R
R
-
-
U
U
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
Silent Boot
Silent Boot
Enabled (Default)
Disabled
This parameter enables or disables the Silent Boot function. When set to ”Enabled”, BIOS is in graphical
mode and displays only an identification logo during POST and while booting. After booting the screen
displays the operating system prompt (such as DOS) or logo (such as Windows 95). If any error occurs
while booting, the system automatically switches to the text mode.
Even if your setting is ”Enabled”, you may also switch to the text mode while booting by pressing
when you see the “Press DELETE key to enter setup” message on the screen.
When set to “Disabled”, BIOS is in the conventional text mode where you see the system initialization
details on the screen.
Num Lock After Boot
Num Lock After
Boot
Enabled (Default)
Disabled
This parameter allows you to activate the Num Lock function upon booting.
Memory Test
Memory Test
Enabled
Disabled (Default)
When set to ”Enabled”, this parameter allows the system to perform a RAM test during the POST routine.
When set to “Disabled”, the system detects only the memory size and bypasses the test routine.