User Guide

AMI BIOS Utility
3-23
Onboard Parallel Port
This parameter allows you to select the address for the parallel port. Selecting
Disabled deactivates the parallel port.
PARALLEL PORT IRQ
This parameter is configurable only if the Onboard Parallel Port is NOT set to
Auto. This allows you to set an IRQ for the parallel port function. The
available IRQ selections are 5 and 7.
PARALLEL PORT ECP DMA
This parameter is configurable only if the Onboard Parallel Port is NOT set to
Auto. and the Parallel Port Mode is set to ECP. This allows you to set an
ECP DMA channel for the parallel port function. The selections are 1 and 3.
PARALLEL PORT MODE
This parameter specifies the parallel port mode. The mode options are SPP,
EPP and ECP.
Onboard IDE
This parameter enables or disables the IDE controller.