User Guide

AMI BIOS Utility
3-22
3.2.6 Peripheral Setup
Select Peripheral from the Setup menu and the following screen appears.
Onboard FDC
This parameter enables or disables the floppy drive controller.
Onboard Serial Port 1
This parameter allows you to select the address for the first serial port.
Selecting Disabled deactivates the port.
Onboard Serial Port 2
This parameter allows you to select the address for the second serial port.
Selecting Disabled deactivates the port.
SERIAL PORT 2 MODE
This parameter is configurable only if the Onboard Serial Port 2 parameter is
enabled. This allows you to specify the serial port 2 mode.