User Guide

AMI BIOS Utility
3-8
Do not change the settings of the Advanced Setup
parameters if you are not a qualified technician.
Doing so may cause fatal system failure.
Quick Boot
During boot-up, the system performs power-on self test (POST) routines.
Enable the parameter if you want to skip some POST routines during the boot
process. Set this to Disabled to let the system perform all the POST
routines and follow the specified boot-up sequence.
Power-on Delay
This parameter lets you set the POST waiting time for the HDD motor to
stabilize before boot up. The settings are from 1 to 15 seconds and
Disabled. The default setting is Disabled.