User Guide

Hardware Installation
2-15
2.9 Connecting Peripherals
2.9.1 Power Cable
A standard power supply has two cables
with six wires each. Plug these cables to
the onboard power connector in such a
way that all the black wires are in the
center. The power connector is marked
CN3 on the system board.
Make sure that the power supply is off before
connecting or disconnecting the power cable.
2.9.2 Mouse
PS/2 Mouse
To connect a PS/2 mouse, simply insert
the PS/2 bracket connector onto CN4 on
the system board. Plug a PS/2 mouse
into the mouse port on the bracket.
Refer to section 3.2.2 for the proper
BIOS setting.