System information

AMI BIOS
3-34
3.7 Onboard NCR SCSI BIOS
The NCR 53C810 SCSI BIOS resides in the same flash memory chip as the
system BIOS. The onboard NCR SCSI BIOS is used to support NCR 53C810
SCSI control card without the need of BIOS code on the SCSI card.
The NCR SCSI BIOS directly support DOS, Windows 3.1 and OS/2, but you
may get better performance by using drivers come from the NCR SCSI card
vendor or from operating system (such WIndows 95). For detail, refer to the
installation manual of your NCR 53C810 SCSI card.
3.8 AMI Flash Utility
The AMI Flash Utility allows you to upgrade the system BIOS. To get the AMI
flash utility and the upgrade BIOS file, contact your local distributor or visit our
homepage at http://www.aopen.com.tw . The file name of AMI flash utility is
AMIFLASH.EXE, run this program under DOS, follow the instruction on the
screen, actually, you need only input the BIOS file name. After programming,
reboot your system for the new BIOS to take effect.
Warning: Make sure you use AMI Flash Utility
version 5.23 or later, the version before 5.23
has bug to program INTEL 12V Flash ROM,
and after the programming, the system may
fail to reboot.
Warning: Be sure you get the correct BIOS
file and carefully read the instruction and
notice from AOpen homepage. Use incorrect
BIOS file on incorrect version of mainboard
may damage your system.