System information

AMI BIOS
3-3
3.2.1 Standard Setup
The following screen appears if you select Standard from the Setup options:
This Standard Setup menu allows you to setup basic information of hard disk,
data/time and floppy. For hard disk parameters, choose any of following:
Standard --> Pri Master
Standard --> Pri Slave
Standard --> Sec Master
Standard --> Sec Slave
These items are setting of onboard IDE primary and secondary channel, each
channel supports two IDE devices which are connected as master and slave.
Refer to section 2.3 "Connectors" of how to connect them. The example below
is for Pri Master.
Primary Master Hard Disk
Type : Auto
LBA/Large Mode : Off
Block Mode : Off
32Bit Mode : Off
PIO Mode : Auto