System information

AMI BIOS
3-28
3.2.6 Peripheral Setup
Select Peripheral from the Setup menu and the following screen
appears.
Peripheral Setup
OnBoard FDC : Auto
OnBoard Serial Port1 : Auto
OnBoard Serial Port2 : Auto
Serial Port2 Mode : Normal
OnBoard Parallel : Auto
Parallel Port IRQ : 7
Parallel Port Mode : SPP
OnBoard IDE : Both
Peripheral --> OnBoard FDC
OnBoard FDC
Auto
Disabled
Enabled
This item enables or disables the onboard floppy drive
controller.
Peripheral --> OnBoard Serial Port1
Peripheral --> OnBoard Serial Port2
OnBoard Serial
Port1
Auto
Disabled
3F8h
2F8h
3E8h
2E8h
These two items allow you to select the address for onboard
serial ports. Selecting Disabled deactivates the port.
Peripheral --> Serial Port2 Mode
Serial Port2
Mode
Normal
HPSIR
ASKIR
This item is configurable only if the " OnBoard Serial Port2"
is enabled. This allows you to specify the mode of serial
port2. The available mode selections are: