System information

AMI BIOS

3-20

Power Mgmt --> Green Monitor Power Down State

Green Monitor

Power Down State

Standby

Suspend

Off

This function lets you select at which state to power

down your monitor. BIOS blanks the screen and power

down the monitor by special signal (VSYNC, HSYNC) on

the monitor connector. You need DPMS (Display Power

Management Standard) monitor to support power down

function.

Power Mgmt --> Display Card Power Down Mode

Display Card Power

Down State

Disabled

Standby

Suspend

This option allows you to select at which state to power

down your system display card. You need display card

which supports power down command for this function.

Power Mgmt --> Hard Disk Power Down Mode

Hard Disk Power

Down State

Disabled

Standby

Suspend

This option allows you to select at which state to power

down your IDE hard disk. The reduction of power

consumption is achieved by shutting down the spindle

motor of HDD. You need HDD which supports power

down command for this function.

Power Mgmt --> Hard Disk Timeout (Minutes)

Hard Disk Timeout

(Minute)

Disabled

.....

This option lets you set the time of your IDE hard disk to

go into power down state (spindle motor off) when there

is no hard disk activities. This item is independent with

the power state described above (Standby and

Suspend).