System information

AMI BIOS
3-12
3.2.3 Chipset Setup
The Chipset Setup includes settings for the chipset dependent features,
especially the features related to system performance.
Caution: Make sure you understand the
meaning of each setting before you try to
change anything. The settings in this section
improve system performance but may cause
system unstable if the setting are not correct
for your system configuration.
Chipset Setup
430HX Global Features : Disabled
Memory Hole : Disabled
8Bit I/O Recovery Time (Sysclk) : 4
16Bit I/O Recovery Time (Sysclk) : 1
DRAM Timings : 60ns
DRAM Refresh Rate : 66 Mhz
ISA Clock : PCICLK/4
Turbo Read Leadoff : Disabled
DRAM Read Burst Timing : x333
DRAM Write Burst Timing : x222
Fast RAS to CAS Delay (clocks) : 3
DRAM Leadoff Timing : 6/5/3/4
Speculative Leadoff : Enabled
Turn-Around Insertion : Disabled
Peer Concurrency : Disabled
Memory Error Check Mode : Disabled
PCI 2.1 Compliant : Disabled
USB Host Controller : Disabled
USB Legacy Support : Disabled
Chipset --> 430HX Global Features
430HX Global
Features
Disabled
Enabled
This option is a global control to enable or disable the
430HX chipset enhancement features. The Turbo default
setting enables this item.