User manual

EE400-R GigaFast Ethernet.
P 7
Microsoft Internet Explorer
(
or Netscape
)
web browser.
All TCP/IP networked computers in LAN.
1.4 Panel Description
1.4.1 Front Panel
Device Indicators
PWR PWR (power): The Power LED illuminates whenever the EE400-R is powered on.
RDY RDY (ready): The RDY LED blinks once per second when it is working normally, or it
will blink faster or be off if there is something wrong.
WAN Indicators
Lnk/Act Lnk (link): ON means WAN (DSL/Cable modem) is connected to EE400-R.
Act (activity): Blinking means there is data communication.
If the LED is continuousl
y
illuminated, it means WAN device is successfull
y
connected or
EE400-R’s WAN port is working now.
10/100
Indicates 10 or 100Mbps wire speed correspondin
g
to WAN port.
(
On is 100Mps
)
FDX/COL FDX (Full Duplex Mode): On means the current connection is on full duplex mode.
COL (Collision): Blinking means the connection is experiencing collisions.
The WAN port has NIC card type pin assignment, so it can connect to a HUB device
or connect directly to a PC with a crossover cable. (Please refer to Appendix C-1 to
check your WAN devices)
Modem Indicators
MR MR (Modem Ready): serial port connected with MODEM correctly.
CD CD (Carrier Detection): MODEM is on-line now and detects data carrier.