User manual

EE400-R GigaFast Ethernet.

P 29

4. Dial-up Network: PPP (point-to-point protocol) is the most popular protocol to access the Internet

via telephone line and modem (v.90/ISDN). If your Internet connection type is a modem connection,

ISP phone No., PPP account and PPP password.

select PPP and enter the following information:

Dial on Demand & Auto disconnect is the same as PPPoE.

Modem Initial String: Type the AT commands if it is needed. (Some ISDN/v.90 modems

need this) ex. Type”W2” to request MODEM to report carrier speed instead of DTE speed.

( This works only for most Rockwell/conexant v.90 modems)

When all settings are complete, don’t forget to type Y to restart the system.

3.2.3 LAN Setup

The LAN Setup configuration in a telnet environment has 2 items.

1. LAN IP Address: type in the IP address of the EE400-R as it is seen by the internal LAN

computers.

If Telnet is used and the LAN IP is changed, the administrator may lose connection with

The EE400-R when the

are not in the same LAN se

ment, so administration will not wor

until they are in the same segment again. (This can be done by releasing and renewing the IP.)

2. LAN DHCP Server:

Choose this option if

ou want the EE400-R to assi

n IPs to LAN computers automaticall