User manual

EE400-R GigaFast Ethernet.
P 28
WAN IP Address: The IP Address of EE400-R as seen by external users on the
Internet (including your ISP).
WAN Subnet Mask: The EE400-R WAN IP address ranges. (i.e. 255.255.255.248)
WAN Gateway:
ISP will provide you with the Gateway IP Address.
WAN 1st DNS:
DNS (Domain Name Server). ISP will provide this address.
WAN 2nd DNS:
The second DNS.
When all settings are complete, don’t forget to type Y to restart the system.
2. DHCP Client: DHCP Client connection means that the ISP will dynamically assign an IP address and
other settings, so no settings are required to be filled in.
If
y
our Internet connection t
y
pe is a DHCP client t
y
pe, such as a Cable modem,
y
ou should
select this option
When all settings are complete, don’t forget to type Y to restart the system.
3. PPP over Ethernet: PPPoE (point to point protocol over Ethernet) connection means that
personal users can browse Internet through DSL-based broadband connection. If you are
connected to the Internet through a DSL line, check your ISP if they use PPPoE. If they do,
choose the PPPoE option and t
y
pe in:
optional depending on the ISP).
Dial on Demand: If you choose this option, EE400-R will attempt to connect with the ISP, if (1)
there is at least one LAN user trying to access the Internet and (2) the current WAN
connection is disconnected.
Auto disconnect when idle over sec: Fill in a time period in seconds if you want to
disconnect automaticall
y
when
y
our Internet connection is idle more than the specified period of time.
When all settings are complete, don’t forget to type Y to restart the system.
Your PPPoE account and PPPoE password. (The PPPoE Service Name may be