User manual

EE400-R GigaFast Ethernet.
P 20
ISP phone No., PPP account (username), and PPP password.
Dial on Demand & Auto disconnect is the same as in PPPoE.
Modem Initial String: Type the AT commands if it is needed. (Some ISDN/v.90 modem
need this) ex. Type”W2” to request MODEM to report carrier speed instead of DTE speed.
(This works only for most Rockwell/conexant v.90 modems)
Click the [Save&Restart] button.
A
fter the save & restart, the assi
g
ned IP address can be checked on the “Device Info” pa
g
e.
(refer to 3.1.1)
If something is wrong, please browse the system event log to check the dial/log-in activity. (refer to 3.1.2)
3.1.4 EZ Setup - LAN
Click the EZ setup-LAN link on the left frame to setup LAN.