User manual

EE400-R GigaFast Ethernet.
P 19
If the EE400-R is connected to the Internet through a DSL line, ask the ISP if they use PPPoE for
dial-up service. If they do, select the PPPoE option then fill in:
Your PPPoE account and PPPoE password. (The PPPoE Service Name may be
optional dependin
g
on the ISP
)
.
Dial on Demand: Choose this option. The EE400-R will attempt to connect with the ISP, if (1)
there is at least one LAN user trying to access the Internet or (2) the current WAN
connection is disconnected.
Auto disconnect when Idle Time is over __ sec: fill in a time period in seconds if you want to
disconnect automaticall
y
when
y
our Internet connection is idle more than that period of time.
Click the [Save&Restart] button.
After the save & restart, the assigned IP address can be checked on the “Device Info” page.
(refer to 3.1.1)
If something is wrong, please browse the system event log to check the dial/log-in activity. (refer to 3.1.2)
D. PPP Connection
PPP (point-to-point protocol) is the most popular protocol to access the Internet via telephone
line and modem (v.90/ISDN). If your Internet connection type is a modem connection, select PPP
and fill in the following:
C. PPPoE Connection