User manual

EE400-R GigaFast Ethernet.
P 12
All Ethernet adapter information is shown in this window.
Check if you get an IP address like 192.168.8.x where x is any number between 17 and 128. Then check
that the default
g
atewa
y
is 192.168.8.1.
Windows XP/2000/NT4 :
Click Start and select Run… T
y
pe in “command”, which will brin
g
up the MS-DOS command window. T
y
pe
“ipconfig /all” to check the Ethernet adapter information.
All Ethernet adapter information is shown in this window.
Check if you get an IP address like 192.168.8.x where x is any number between 17 and 128. Then check that
the default gateway is 192.168.8.1.
If everything is correct, the network should be working now. Please go to the next Chapter to continue setup.
If something is wrong, please refer to Chapter 5 for troubleshooting.