User manual

EE400-R GigaFast Ethernet.
P 10
2.3 Network Settings in Administrator’s computer
In order to confi
g
ure the EE400-R with a networked PC in the LAN, it is necessar
y
for the administrator
to have correct network settings in the PC, so that the communication between the EE400-R and the
administrator ‘s PC is possible. The following description assumes that the EE400-R is in factory default
condition. (If not, hold the reset button down for at least 5 seconds). The EE400-R LAN interface IP will
become 192.168.8.1 and the DHCP server for LAN users is on with an IP range from 192.168.8.17 to
192.168.8.128 by default.
Follow the procedures to set your computer as a DHCP Client. (If the fixed IP mode for administrator’s
computer is desired, please refer to Appendix E.)
Step1:
Click the Start button, select Settings, and then choose Control Panel. Double click the Network icon.
Click the Confi
g
uration tab. Select the TCP/IP protocol option that is associated with
y
our network
card/adapter. (See blue box below.) Click the Properties button.