Specifications

- 7 -
Performing the Factory Reset will erase all previously entered
device settings.
Table 2: Connections Ports
Factory Default Settings
Password
Default setting: 0000
Setting up password: When configuring the device, press Enter to login the configuration for
the first time. It is recommended that you set a password for security and management
purpose.
Password forgotten? If you forgot the password, you can reset the device to factory setting.
Refer to the section titled “Factory Reset” for details.
Local and Internet Port Addresses
The LAN parameters of the product are pre-set in the factory. The default values are shown
below.
Local Port Internet Port
IP address 192.168.1.254
Subnet Mask 255.255.255.0
DHCP server function Enabled
DHCP client function is enabled to
automatically get the Internet port
configuration from ISP.
IP addresses for
distribution to PCs
253 IP addresses continuing from 192.168.1.1 to 192.168.1.253
Table 3：Local and Internet Port Addresses