Specifications

- 20 -
address like: http://192.168.1.1:8080 (where
192.168.1.254 is your local port IP address.)
SAVE
changing the setting(s), click SAVE to save the
setting(s)
UNDO Click UNDO to clear all the settings on this page.
Virtual Server
In this page, you can set up a local server with specific port number that stands for the service
(e.g. web (80), FTP (21), Telnet (23)). When this device receives an incoming access request
for this specific port, it will be forwarded to the corresponding internal server. You can add
virtual servers by either port numbers or by names.
Maximum 24 Server entries are allowed and each port number can only be assigned to one IP
address.
NOTE: Setting up Virtual Server is like opening the firewall, which exposes your network to
users on the Internet. Which means the IP Share’s NAT will no longer be able to provide
protection from hackers.