Specifications

- 15 -
Static Mode
For leased line users, information provided by their ISPs has to be filled in the below
respective fields when this mode is selected. Information from your ISP includes: IP address,
Subnet Mask, Gateway, primary DNS, secondary DNS, note that there may be more than one
IP address from your ISP, select one address and enter it in the corresponding field.
Figure 7
Adapter Address
This field is grayed out, because the Adapter
Address is not supposed to be entered randomly.
Do Not alter the content unless you are sure it is
necessary to modify your MAC address. To
modify the address, check  Modify and enter the
desired MAC address.
Device/Computer Name
Enter a descriptive name for identification
purpose. Some Internet Service Providers (ISP)
requires this information and if that is the case,
they will provide you with the name
Domain Name
For example: yourcompany.com. The maximum
input for this field is 32 alphanumeric characters
and it is case insensitive
IP Address Enter the information provided by your ISP.
Subnet Mask Enter the information provided by your ISP.
Gateway Enter the information provided by your ISP.
Primary/Secondary Enter the information provided by your ISP.
SAVE After completing the settings on this page, click
SAVE to save the settings.
UNDO Click UNDO to clear all the settings on this page.